Code 39
Restore Factory Defaults
Enable/Disable Code 39
**【Enable Code 39】
If the scanner fails to identify Code 39 barcodes, you may first try this solution by scanning the Enter
Setup barcode and then Enable Code 39 barcode.
Transmit Start/Stop Character
Code 39 uses an asterisk (*) for both the start and the stop characters. You can choose whether or not to transmit the
start/stop characters by scanning the appropriate barcode below.
【Transmit Start/Stop Character】
67
**【Restore the Factory Defaults of Code 39】
【Disable Code 39】
**【Do Not Transmit Start/Stop Character】
【Enter Setup】
**【Exit Setup】