【Enter Setup】
GS1 Databar(RSS)
Restore Factory Defaults
Enable/Disable GS1 Databar
**【Enable GS1 Databar】
If the scanner fails to identify GS1 Databar barcodes, you may first try this solution by scanning the Enter
Setup barcode and then Enable GS1 Databar barcode.
Transmit Application Identifier "01"
**【Transmit Application Identifier "01"】
**【Exit Setup】
**【Restore the Factory Defaults of GS1 Databar】
【Disable GS1 Databar】
【Do Not Transmit Application Identifier "01"】
78