Set A Pattern - HIKVISION DeepinMind Super DS-96000NXI-I Series User Manual

The PTZ control panel displays on the right of the interface.
Step 2 Click Patrol on the PTZ control panel.
Step 3 Select a patrol in the text field.
Step 4 Click Call to call it.
Step 5 (Optional) Click Stop to stop calling it.

6.3.5 Set a Pattern

Purpose:
Patterns can be set by recording the movement of the PTZ. You can call the pattern to make the
PTZ movement according to the predefined path.
Step 1 Click
The PTZ control panel displays on the right of the interface.
Step 2 Click Pattern to configure pattern.
Step 3 Select the pattern No. in the text field.
Step 4 Set the pattern.
1) Click Record to start recording.
2) Click corresponding buttons on the control panel to move the PTZ camera.
3) Click Stop to stop recording.
The movement of the PTZ is recorded as the pattern.
Step 5 Repeat steps 3-4 to set more patterns.
Network Video Recorder User Manual
Figure 6-11 Patrol Configuration
on the quick settings toolbar of the PTZ camera live view.
Figure 6-12 Pattern Configuration
59