HIKVISION DeepinMind Super DS-96000NXI-I Series User Manual page 147

Step 1 Go to System > Event > Smart Event > Human Face Comparison.
Step 2 Select a camera to configure.
Step 3 Select Mode as Face Picture Comparison.
Step 4 Check the checkbox of Enable Face Picture Comparison.
Step 5 Optionally, check Save VCA Picture to save the captured pictures of VCA detection. After the
face picture comparison is enabled, the comparison results will be uploaded for face
comparison alarm. If the comparison produced a match, both the real-time face picture and the
target picture from the library will be uploaded. If no match is produced, the real-time face
picture is uploaded to center only. Up to 6 connected cameras can be configured for face
picture comparison simultaneously.
Step 6 Optionally, configure Comparison Failed Prompt, Upload to monitoring center when
comparison failed, and Enable Alarm Output Pulse.
Comparison Failed Prompt: The prompt will show in live view Target Detection (Face
●
Detection) when human face comparison failed.
Upload to monitoring center when comparison failed: Check it to upload the captured human
●
face picture to monitoring center when human face comparison failed.
Network Video Recorder User Manual
Figure 15-2 Human Face Comparison
145