Configure Stranger Alarm - HIKVISION DeepinMind Super DS-96000NXI-I Series User Manual

Enable Alarm Output Pulse: If you want to trigger alarm output when comparison succeeded,
●
check Enable Alarm Output Pulse before configuring trigger alarm output in Linkage Action
interface.
Step 7 Select face picture libraries and set similarity.
Step 8 Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Step 9 Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Step 10 Click Apply to save the settings.

15.3.2 Configure Stranger Alarm

Purpose:
Compare detected human face with specified face picture library. Trigger alarm when comparison
failed.
Step 1 Go to System > Event > Smart Event > Human Face Comparison.
Step 2 Select a camera to configure.
Step 3 Select Mode as Stranger Comparison.
Step 4 Check the checkbox of Enable Stranger Comparison.
Step 5 Optionally, check Save VCA Picture to save the captured pictures of VCA detection. After the
face picture comparison is enabled, the comparison results will be uploaded for face
Network Video Recorder User Manual
Figure 15-3 Human Face Comparison
146