Safety Instructions
Proper configuration of all passwords and other security settings is the responsibility of the
●
installer and/or end-user.
In the use of the product, you must be in strict compliance with the electrical safety
●
regulations of the nation and region. Please refer to technical specifications for detailed
information.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power
●
Source with 100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to
technical specifications for detailed information.
Do not connect several devices to one power adapter as adapter overload may cause
●
over-heating or a fire hazard.
Please make sure that the plug is firmly connected to the power socket.
●
If smoke, odor or noise rise from the device, turn off the power at once and unplug the power
●
cable, and then please contact the service center.
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
Ensure unit is installed in a well-ventilated, dust-free environment.
●
Unit is designed for indoor use only.
●
Keep all liquids away from the device.
●
Ensure environmental conditions meet factory specifications.
●
Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of
●
dropping it may cause damage to the sensitive electronics within the unit.
Use the device in conjunction with an UPS if possible.
●
Power down the unit before connecting and disconnecting accessories and peripherals.
●
A factory recommended HDD should be used for this device.
●
Improper use or replacement of the battery may result in hazard of explosion. Replace with
●
the same or equivalent type only. Dispose of used batteries according to the instructions
provided by the battery manufacturer.
Network Video Recorder User Manual
3