Table of Contents
Advertisement
Step 1 Go to System > User.
Step 2 Select the admin user from the list and click Modify.
Step 3 Edit the admin user information as demand, including the new admin password (strong
password is required), and MAC address.
Step 4 Edit the unlock pattern for the admin user account.
9) Check the checkbox of Enable Unlock Pattern to enable the use of unlock pattern when
logging in to the device.
10) Use the mouse to draw a pattern among the 9 dots on the screen, and release the mouse
when the pattern is done.
Please refer to Chapter 2.3 Configure Unlock Pattern for Login for detailed instructions.
Network Video Recorder User Manual
Figure 19-9 Edit User (Admin)
183
Advertisement
Table of Contents
