Table of Contents
Advertisement
Check Save VCA Pictures for human body detection/vehicle detection, line crossing detection,
intrusion detection, region entrance, or region exiting.
Step 1 Go to Smart Analysis > Smart Analysis > Task Configuration.
Step 2 Check cameras to enable corresponding analysis mode. Ensure engine is available for the
selected analysis mode.
Step 3 Enable auto analysis.
1)
Click Edit.
2) Optionally, check Enable of Display Status and Notify Surveillance Center.
3) Set Start Time of video to analyze.
4) Click OK.
Step 4 Check cameras and click Enabled to start analyzing.
Task status includes 3 situations: Disabled, Waiting, and Enabled.
Disabled: No analysis task is enabled on the camera.
●
Network Video Recorder User Manual
Figure 13-2 Auto Analysis
134
Advertisement
Table of Contents
