Table of Contents
Advertisement
Refer to Chapter 7.1.2 Add the Network Disk for network HDD connections.
Step 1 Go to Storage > Recording Schedule.
Step 2 Select a camera.
Step 3 Check Enable Schedule.
Step 4 Select a Record Type. The record type can be Continuous, Motion Detection, Alarm, Motion |
Alarm, Motion & Alarm, and Event.
Different recording types are configurable.
Continuous: scheduled recording.
●
Event: recording triggered by all event triggered alarm.
●
Motion: recording triggered by motion detection.
●
Alarm: recording triggered by alarm.
●
M/A: recording triggered by either motion detection or alarm.
●
M&A: recording triggered by motion detection and alarm.
●
Step 5 Select a day and click-and-drag the mouse on the time bar to set the record schedule.
Step 6 Repeat the above steps to schedule recording for other days in the week.
Step 7 Click Apply to save the settings.
Network Video Recorder User Manual
Figure 7-9 Record Schedule
73
Advertisement
Table of Contents
