Table of Contents
Advertisement
comparison alarm. If the comparison produced a match, both the real-time face picture and
the target picture from the library will be uploaded. If no match is produced, the real-time
face picture is uploaded to center only.
Step 6 Optionally, configure Stranger Prompt, Upload to monitoring center when comparison
succeeded, and Enable Alarm Output Pulse.
Stranger Prompt: The prompt will show in live view Target Detection (Face Detection) when
●
human face comparison failed.
Upload to monitoring center when comparison failed: Check it to upload the captured human
●
face picture to monitoring center when human face comparison failed.
Enable Alarm Output Pulse: If you want to trigger alarm output when comparison succeeded,
●
check Enable Alarm Output Pulse before configuring trigger alarm output in Linkage Action
interface.
Step 7 Select face picture libraries and set similarity.
Step 8 Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Step 9 Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Step 10 Click Apply to save the settings.
15.4 Face Picture Retrieval
15.4.1 Search by Face Picture Comparison Event
Purpose:
Search face picture by face picture comparison results.
Step 1 Go to Smart Analysis > Smart Search > Face Search > Search by Event.
Step 2 Set the start time and end time of the face pictures to search.
Step 3 Select IP channel.
Step 4 Select Event Type as Face Picture Comparison.
Step 5 Click Start Search. The matched results are displayed on the pictures list.
15.4.2 Search by Uploaded Picture
Purpose:
You can search the face pictures by uploaded picture.
Step 1 Go to Smart Analysis > Smart Search > Face Search > Search by Picture.
Step 2 Select IP channel.
Step 3 Click Upload Sample from Local and select face pictures from your local directory for search.
Network Video Recorder User Manual
147
Advertisement
Table of Contents
