6.4.7 Face Picture Library Management
Face picture library is mainly used for face picture storage and face picture comparison.
Note
The section is only available for certain models.
Add a Face Picture Library
Face picture library is used to store face pictures, it is essential for face picture comparison.
Steps
1. Go to Configuration → Face Picture Library.
2. Enter the admin password for authorization.
3. Click Add.
4. Enter the face picture library name.
5. Click Add.
What to do next
After a face picture library is added, you can edit its name, delete it, or upload face pictures to it.
Upload Face Pictures to the Library
You can upload a single face picture or import multiple face pictures to the library.
Before You Start
Ensure you have created a face picture library and enabled face picture comparison.
Steps
1. Go to Configuration → Face Picture Library.
2. Find the face picture library that you are going to upload face pictures, and click
3. Click Add.
4. Import picture(s).
Note
● Only JPG and JPEG formats are supported.
● Each picture size should be less than 1 MB.
● The picture resolution shall be between 80 × 80 and 1920 × 1080.
Network Video Recorder User Manual
Add one face picture to the library.
Add multiple face pictures to the library.
71
.