Pc Card Problems - Getac 3X02 User Manual

2. Open the media bay cover by sliding the release latch towards the left.
3. Insert a small rod, such as a straightened paperclip, into the drive's manual
eject hole and push firmly to release the tray.
4. Pull the tray out until fully extended, and then remove the disc.

PC Card Problems

The PC card does not work.
Make sure that the PC card is correctly seated.

If the card requires an IRQ (Interrupt ReQuest), make sure that there is one

available.
The PC card stops communicating properly.
The application may have been reset when the computer is turned off or in

Sleep mode. Exit and restart the application.
8-8
Troubleshooting