Using The Port Replicator (Optional) - Getac 3X02 User Manual

Using the Port Replicator (Optional)

A port replicator is available as an option. This device eliminates the hassles of
having you connect and disconnect the various cables when carrying your computer
around and allows a variety of peripherals to be connected including a headphone
or microphone, etc. The port replicator connects to the expansion bus connector
at the rear of your computer.
1. Slide open the expansion bus connector cover.
2. Connect your port replicator to the expansion bus connector (
For more detailed information, refer to the Operating Instructions of the port replicator.
CAUTION:
 Hot/warm docking and hot/warm undocking are not possible with the port
replicator.
 Contact your dealer for the correct type of port replicator (docking input
device) to connect to the expansion bus connector of your computer.
4-16
Expanding Your Computer
).