Getac 3X02 User Manual page 72

4. Slide the second battery pack all the way into the slot. Make sure to observe
the correct orientation (the ribbon strip must face outward for future battery pack
removal).
5. Close the media bay cover to secure the second battery pack.
NOTE: To remove the second battery pack, press upwards the battery release
latch () and carefully pull on the ribbon strip () to remove the battery pack.
On the exterior side of the second battery pack is a gas gauge for displaying the
estimated battery charge. When the battery pack is not installed in the computer
and you want to know the battery charge, you can press the switch with a pointed
device to see the corresponding value of indicator segment that light green. The
value of the corresponding green segment indicates the relative percentage of the
battery charge. The battery pack is fully discharged when you see no segment glowing
green.
3-8
Managing Power