Getac B300 User Manual
  1. Manuals
  2. Brands
  3. Getac Manuals
  4. Laptop
  5. B300
  6. User manual

Getac B300 User Manual

Hide thumbs Also See for B300:
Table of Contents

Advertisement

Quick Links

See also: Reference Manual , User Manual
B300
USER'S MANUAL
Rugged Mobile Computing Solutions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the B300 and is the answer not in the manual?

Questions and answers

Related Manuals for Getac B300

Summary of Contents for Getac B300

  • Page 1 B300 USER’S MANUAL Rugged Mobile Computing Solutions...
  • Page 2 All other brand and product names are trademarks or registered trademarks of their respective owners. NOTE The information in this manual is subject to change without notice. For the latest version of the manual, please visit the Getac website at www.getac.com.

  • Page 3: Table Of Contents

    Table of Contents Chapter 1 Getting Started ..............1-1 Getting the Computer Running ..........1-2 Unpacking ................1-2 Using the Tether (Optional) ..........1-3 Connecting to AC Power ............ 1-4 Turning On and Off the Computer ........1-5 Taking a Look at the Computer ..........1-7 Front Components ..............
  • Page 4 Inserting and Removing a Disc ........2-15 Using the Network Features ..........2-17 Using the LAN ..............2-17 Using the Wireless LAN ............ 2-17 Using the Bluetooth Feature ..........2-19 Turning On/Off the Bluetooth Radio ......2-19 Connecting to another Bluetooth Device ....... 2-20 Using the WWAN Feature (Optional) ........
  • Page 5 Security Menu ..............5-12 Boot Menu ................ 5-14 Exit Menu ................5-15 Quick BIOS Settings ............... 5-16 Chapter 6 Using Getac Software ............6-1 G-Manager ................6-2 System Tab ................6-3 Battery Tab ................6-4 ECO Tab ................6-6 Light Sensor Tab ..............6-8 Antenna Tab ...............
  • Page 6 LAN Problems ..............8-7 PC Card Problems ..............8-7 Power Management Problems .......... 8-8 Software Problems ............. 8-9 Sound Problems ..............8-9 Startup Problems .............. 8-10 WLAN Problems ..............8-10 Other Problems ..............8-12 Resetting the Computer ............8-13 System Recovery ..............8-14 Appendix A Specifications ..............

  • Page 7: Chapter 1 Getting Started

    Chapter 1 Getting Started Congratulations on purchasing this rugged computer. This chapter first tells you step by step how to get the computer up and running. Then, you will find a section briefly introducing the external components of the computer. Getting Started...

  • Page 8: Getting The Computer Running

    Getting the Computer Running Unpacking After unpacking the shipping carton, you should find these standard items: Rugged computer  Accessories:  − AC adapter − AC power cord − Document(s) − Stylus and tether (depending on your model) Inspect all the items. If any item is damaged or missing, notify your dealer immediately.

  • Page 9: Using The Tether (Optional)

    Using the Tether (Optional) A tether is provided for attaching the stylus to your computer. 1. Insert one of the tether’s loop ends through the hole of the stylus (as  indicated by below). Then, insert the other end through the first loop ...

  • Page 10: Connecting To Ac Power

    Connecting to AC Power The computer operates either on the external AC power or internal battery power. It is suggested that you use AC power when you start up the computer for the very first time. CAUTION: Use only the AC adapter included with your computer. Using other AC adapters may damage the computer.

  • Page 11: Turning On And Off The Computer

    NOTE: When the AC adapter is connected, it also charges the battery pack. For information on using battery power, see Chapter 3. Turning On and Off the Computer Turning On  1. Open the top cover by pushing on the cover latch ( ) and lifting up the ...
  • Page 12 2. Press the power button ( 3. The Windows operating system should start. Turning Off When you finish a working session, you can stop the system by turning off the power or leaving it in Sleep or Hibernation mode: To... Do this...

  • Page 13: Taking A Look At The Computer

    Taking a Look at the Computer NOTE: Depending on the model you purchased, the appearance of your computer may not be exactly the same as those shown in this manual. CAUTION: You need to open the protective covers to access the connectors. When not using a connector, make sure to close the cover completely for water- , dust-, and fire-proof integrity.

  • Page 14: Rear Components

    Rear Components Component Description See Also  Power Connector Connects the AC adapter. P. 1-3  USB Port Connects a USB device, such as a USB P. 4-5 flash disk, printer, digital camera, joystick, and more.  WWAN Pass- Connects the external antenna for through Connector WWAN (wireless wide area network) (option)

  • Page 15: Right-Side Components

    Component Description See Also  Kensington Lock Locks the computer to a stationary P. 7-2 object for security. Right-Side Components Component Description See Also  Expansion Card Depending on your model, the slot can Slot be any of the following: ExpressCard Accepts an ExpressCard/34 or P.
  • Page 16 Component Description See Also  SD Card Reader Accepts a Secure Digital (SD) card for P. 4-14 removable storage media.  HDMI Connects a HDMI (High-Definition Multi- P. 4-2 Connector media Interface) monitor or TV set.  Hard Disk Drive Inside is the hard disk drive.

  • Page 17: Left-Side Components

    Left-Side Components Component Description See Also  Battery Pack Supplies power to your computer when P. 3-3 external power is not connected.  Smart Card Accepts a smart card for additional P. 4-9 Reader security feature. NOTE: On your computer, the Smart Card reader is a part of the super multi drive module.

  • Page 18: Top-Open Components

    Top-open Components Component Description See Also  LCD Screen Displays the output of the computer. P. 2-10 May include the optional touchscreen feature. 1-12 Getting Started...
  • Page 19 Component Description See Also  Quick Buttons P. 2-10 Toggles the “Blackout” mode on or off. Brings up the ECO menu for selecting a power profile when using battery power. Toggles the sunlight-readable mode on or off. Enables or disables light sensor. ...
  • Page 20 Component Description See Also  Fingerprint Serves as the fingerprint verification, P. 2-24 Scanner preventing unauthorized access to your computer.  Stereo Speaker Sends out sound and voice from the computer. Indicators Show the current status of the computer’s devices. Power Lights green when computer is on.

  • Page 21: Bottom Components

    Bottom Components Component Description See Also  Memory Slots Inside are the memory slots for P. 4-15 expanding the memory size of your computer. 1-15 Getting Started...

  • Page 23: Operating Your Computer

    Chapter 2 Operating Your Computer This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user, you may choose to read only the parts containing information unique to your computer.

  • Page 24: Using The Keyboard

    Using the Keyboard Your keyboard has all the standard functions of a full-sized computer keyboard plus an Fn key added for specific functions. The standard functions of the keyboard can be further divided into four major categories: Typewriter keys  Cursor-control keys ...

  • Page 25: Numeric Keypad

    Numeric Keypad A 15-key numeric keypad is embedded in the typewriter keys as shown next: Numeric keys facilitate entering of numbers and calculations. When Num Lock is on, the numeric keys are activated; meaning you can use these keys to enter numerals.

  • Page 26: Function Keys

    Function Keys On the top row of the keys are the function keys: F1 to F12. Function keys are multi-purpose keys that perform functions defined by individual programs. Fn Key The Fn key, at the lower left corner of the keyboard, is used with another key to perform the alternative function of a key.
  • Page 27 Description Increases the sound volume. Switches the display output to the next choice if an external display (either VGA or HDMI) is connected. The hot keys are equivalent to Windows logo key + P. Choices are: LCD only LCD + External display (Duplicate) LCD + External display (Extend) External display only Decreases the LCD brightness.

  • Page 28: Windows Keys

    Windows Keys The keyboard has two keys that perform Windows-specific functions: Windows Logo key and Application key. Windows Logo key opens the Start menu and performs software- specific functions when used in combination with other keys. The Application key usually has the same effect as a right mouse click. (See your Windows manual for more information.) Operating Your Computer...

  • Page 29: Using The Touchpad

    Using the Touchpad CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may damage the touchpad surface. NOTE: Press Fn+F9 to toggle the touchpad on or off.  For optimal performance of the touchpad, keep your fingers and the ...
  • Page 30 Here are some common terms that you should know when using the touchpad: Term Action Point Move your finger on the pad until the cursor points to the selection on the screen. Click Press and release the left button. –or– Tap gently anywhere on the pad.

  • Page 31: Configuring The Touchpad

    Configuring the Touchpad You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vice versa. You can also change the size of the on-screen pointer, the speed of the pointer, and so on.

  • Page 32: Using The Touchscreen (Optional)

    Using the Touchscreen (Optional) NOTE: Press Fn+F8 to toggle the touchscreen on or off. CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the touchscreen. Doing so may damage the touchscreen surface. Use your finger or the included stylus.
  • Page 33 Equivalent Term/Action Mouse Function Tap: Touch the screen once. Click/Point Double-tap: Touch the screen twice rapidly. Double-click Tap and hold: Tap and hold until a popup menu Right-click appears. Drag: Hold the stylus (or finger) on the screen and Drag drag across the screen until reaching your destination.

  • Page 34: Using The Quick Buttons

    Using the Quick Buttons Located on top of the keyboard are four quick buttons: Button Description Toggles the “Blackout” mode on or off. In Blackout mode, the LCD backlight and LED indicators are turned off. To bring the computer out of Blackout mode, press P1 or the power button.
  • Page 35 Button Description Select a mode before the ECO menu disappears. You can select a mode by pressing the ECO button or the arrow key. The ECO mode will return to the default Off setting when AC power is connected, any power related setting is changed, the computer resumes from Sleep/Hibernation mode, or the computer is restarted.

  • Page 36: Using The Dvd Drive

    Using the DVD Drive Your computer may come with a Super Multi drive. The drive can read from and write to CD, DVD+, DVD- and DVD-RAM media. CAUTION: When inserting a disc, do not use force.  Make sure that the disc is correctly inserted into the tray, and then close ...

  • Page 37: Inserting And Removing A Disc

    Inserting and Removing a Disc Follow this procedure to insert or remove a disc: 1. Turn on the computer. 2. Open the multi-purpose bay cover by sliding the release latch towards the left. 3. Press the eject button and the DVD tray will slide out partially. Gently pull on it until it is fully extended.
  • Page 38 5. Gently push the tray back into the drive. 6. Close the multi-purpose bay cover. NOTE: In the unlikely event that you are unable to release the drive tray by pressing the eject button, you can manually release the disc. (See “Optical Drive Problems”...

  • Page 39: Using The Network Features

    Using the Network Features Using the LAN The internal 10/100/1000Base-T LAN (Local Area Network) module allows you to connect your computer to a network. It supports data transfer rate up to 1000 Mbps. To connect the network cable to the LAN module, connect one end of the LAN cable to the RJ-45 connector on the computer and the other end to the network hub.

  • Page 40: Connecting To A Wireless Network

    3. If you have previously turned WLAN off, you can turn it on using one of the below methods: • Right-click the Getac Utility icon ( ) on Windows taskbar and select Quick Bar. Then click the WLAN button in the Quick Bar as shown below (an X over the button means the radio is currently off.)

  • Page 41: Using The Bluetooth Feature

    To turn on the Bluetooth radio: 1. Make sure that the RF radio (controlled by Fn+F1) is enabled. 2. Right-click the Getac Utility icon ( ) on Windows taskbar and select Quick Bar. Then click the Bluetooth button in the Quick Bar as shown below (an X over the button means the radio is currently off.)

  • Page 42: Connecting To Another Bluetooth Device

    Connecting to another Bluetooth Device 1. Make sure that the Bluetooth function is enabled (as described above). 2. Make sure that the target Bluetooth device is turned on, discoverable and within close range. (See the documentation that came with the Bluetooth device.) 3.

  • Page 43: Using The Wwan Feature (Optional)

    Using the WWAN Feature (Optional) A WWAN (Wireless Wide Area Network) uses mobile telecommunication cellular network technologies to transfer data. The WWAN module of your computer supports 3G or 4G LTE depending on your model. NOTE: Your model only supports data transmission, voice transmission is not ...

  • Page 44: Installing A Sim Card

    To turn on the WWAN radio: 1. Make sure that the RF radio (controlled by Fn+F1) is enabled. 2. Right-click the Getac Utility icon ( ) on Windows taskbar and select Quick Bar. Then click the WWAN button in the Quick Bar as shown below (an X over the button means the radio is currently off.)

  • Page 45: Setting Up A Wwan Connection

    When the WWAN radio is on, the WWAN indicator ( ) glows in green. To turn off the WWAN radio: You can turn off the WWAN radio using the Quick Bar. If you want to quickly turn off all wireless radio, press Fn+F1. Setting up a WWAN Connection To set up a WWAN connection for the first time, follow these steps: 1.

  • Page 46: Using The Fingerprint Scanner

    Using the Fingerprint Scanner WARNING: To protect the fingerprint scanner, be sure to slide close the cover when  not using the fingerprint scanner. We shall not be liable for any loss or damage whatsoever resulting from  your use of the fingerprint scanner or neglect of fingerprint scanner use, or any data loss resulting from such developments as fingerprint authentication malfunctioning.
  • Page 47 2. Start BioExcess. Follow the wizard to enroll your fingerprints. 3. You can then use the fingerprint software to set up how the fingerprint authentication works. For detailed information, click the Help button of the software. 2-25 Operating Your Computer...

  • Page 49: Chapter 3 Managing Power

    Chapter 3 Managing Power Your computer operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way.

  • Page 50: Ac Adapter

    AC Adapter CAUTION: The AC adapter is designed for use with your computer only. Connecting  the AC adapter to another device can damage the adapter. The AC power cord supplied with your computer is for use in the  country where you purchased your computer.

  • Page 51: Battery Pack

    Battery Pack The battery pack is the internal power source for the computer. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the computer. When your applications often access peripherals, you will experience a shorter operating time.

  • Page 52: Initializing The Battery Pack

    The charging time is as follows: Charging Time Battery Type Computer is Off Computer is On and in Idle State 9-cell (4 A) 3.5~4.5 hours 4.0~6.0 hours CAUTION: After the computer has been fully recharged, do not immediately disconnect and reconnect the AC adapter to charge it again. Doing so may damage the battery.

  • Page 53: Checking The Battery Level

    Checking the Battery Level NOTE: Any battery level indication is an estimated result. The actual operating time can be different from the estimated time, depending on how you are using the computer. By Operating System You can find the battery icon on the Windows taskbar (lower-right corner). The icon shows the approximate battery level.

  • Page 54: Replacing The Battery Pack

    Replacing the Battery Pack CAUTION: There is danger of explosion if the battery is incorrectly replaced.  Replace the battery only with the computer manufacturer’s optional battery packs. Discard used batteries according to the dealer’s instructions. Do not attempt to disassemble the battery pack. ...

  • Page 55: Battery Low Signals And Actions

    Battery Low Signals and Actions The battery icon changes appearance to display the current state of the battery. Battery Battery Level Description Icon Discharging The icon shows the charge remaining in 10-percent increments until the charge reaches the low-battery level. The battery charge has reached the low-battery level (10% by default).

  • Page 56: Power-Saving Tips

    Power-Saving Tips Aside from enabling your computer’s power saving mode, you can do your part to maximize the battery’s operating time by following these suggestions. Enter power saving mode when using battery power.  Do not disable automatic power management features. ...

  • Page 57: Expanding Your Computer

    Chapter 4 Expanding Your Computer You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter. Expanding Your Computer...

  • Page 58: Connecting A Vga Or Hdmi Display Monitor

    Connecting a VGA or HDMI Display Monitor If you want the benefits of a larger display screen with higher resolution, you can connect an external display monitor to your computer Your computer supports a VGA connector and a HDMI connector. HDMI (High-Definition Multimedia Interface) is an audio/video interface that transmits uncompressed digital data and therefore delivers true HD quality.
  • Page 59 5. The connected device should respond by default. If not, you can switch the display output by pressing the Fn+F5 hot keys. (You can also change the display through Windows Control Panel.) CAUTION: Do not disconnect the external monitor while the computer is in the Sleep mode or Hibernation mode.

  • Page 60: Connecting A Serial Device

    Connecting a Serial Device Your computer has two serial ports for connecting a serial device such as a serial mouse or serial communication device (modem). Follow this procedure to connect a serial device: 1. Turn off the computer. 2. Plug the device cable to the serial port on the rear of the computer. 3.

  • Page 61: Connecting A Usb Device

    Connecting a USB Device Your computer has one USB 3.0 port and two eSATA/USB 3.0 ports for connecting USB devices, such as a digital camera, scanner, printer, modem, and mouse. The USB ports support transfer rate up to 5.0 Gbit/s for USB 3.0 devices. To connect a USB device, plug the device cable to one of the USB ports.

  • Page 62: Connecting An Esata Device

    Connecting an eSATA Device Your computer has two eSATA/USB combo ports for connecting eSATA devices (such as an external hard drive and external optical drive) / USB devices (see previous section). The port supports SATA II with transfer rate up o 3.0Gbit/s. It can provide 5V power if a certified USB-eSATAcombo cable is used.

  • Page 63: Connecting An Ieee 1394 Device

    Connecting an IEEE 1394 Device Your computer has a mini IEEE 1394 port for connecting IEEE 1394 devices that include not only computer peripheral devices such as scanner, printer and high-quality CCD, but also consumer electronic equipment such as DVCAM and VCR. To connect an IEEE 1394 device, prepare an IEEE 1394 cable.

  • Page 64: Connecting Audio Devices

    Connecting Audio Devices For higher audio quality, you can send or receive sound through external audio devices. Audio Output Connector (green) can be connected to speakers,  headphones, or earphone set. Microphone Connector (pink) can be connected to an external ...

  • Page 65: Using Smart Cards

    Using Smart Cards NOTE: On your computer, the Smart Card reader is a part of the super multi drive module. If the super multi drive module is replaced by a secondary battery pack or hard disk drive, you cannot use the Smart Card reader. With an embedded microcontroller, smart cards have the unique ability to store large amounts of data, carry out their own on-card functions (e.g., encryption and mutual authentication), and interact intelligently with a...

  • Page 66: Using Pc Cards

    Using PC Cards NOTE: Some PC cards require additional system resources. Before using such PC  card, you may have to free other system resources for the PC card. Although some PC cards can be inserted and removed without turning ...

  • Page 67: Push The Eject Button And The Card Will Slide Out Slightly

    2. Select (highlight) the PC card from the list to disable the card. 3. Push the eject button and the card will slide out slightly. 4. Pull the card out of the slot. 4-11 Expanding Your Computer...

  • Page 68: Using Expresscards (Optional)

    Using ExpressCards (Optional) Depending on the model, your computer has an ExpressCard slot. The ExpressCard slot can accommodate a 54 mm (ExpressCard/54) or 34 mm (ExpressCard/34) wide ExpressCard. Typical ExpressCards support a very extensive range of applications including memory, wired and wireless communication cards, and security devices.
  • Page 69 3. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process. To remove an ExpressCard: 1. Double-click on the Safely Remove Hardware icon found on the Windows taskbar and the Safely Remove Hardware window appears on screen.

  • Page 70: Using Storage Cards

    Using Storage Cards NOTE: You can use only storage cards. Your Card Reader does not support cards with I/O (input/output) functions such as a wireless network card or Bluetooth card. Your computer has a storage card reader. The card reader is a small drive for reading from and writing to removable storage cards (or called memory cards).

  • Page 71: System Memory Upgrade

    CAUTION: It is not recommended that you buy and install RAM modules by  yourself. If you want to expand system memory, please ask Getac service center to install DRAM modules for you so that full compatibility can be guaranteed.
  • Page 72 5. To install the RAM module, match the module's notched part with the socket's projected part and firmly insert the module into the socket at a 20-degree angle (). Then push down until the retaining clips lock the module into position (). ...

  • Page 73: Replacing The Hard Disk Drive

    Replacing the Hard Disk Drive 1. Disconnect the AC adapter and remove the battery pack (see chapter 3). 2. Locate the hard disk drive compartment on the right side of the computer. 3. Slide the cover lock to the left () and then lift the release latch () to open the compartment cover.

  • Page 74: Installing A Secondary Battery Pack Or Hard Disk Drive

    Installing a Secondary Battery Pack or Hard Disk Drive You can purchase a secondary battery pack or hard disk drive to be installed in the multi-purpose bay. 1. Make sure that system power is off. 2. Open the multi-purpose bay cover by sliding the release latch towards the left.

  • Page 75: Using Bios Setup

    Chapter 5 Using BIOS Setup BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand.

  • Page 76: When And How To Use

    When and How to Use You need to run BIOS Setup Utility when: You see an error message on the screen requesting you to run BIOS  Setup Utility. You want to restore the factory default BIOS settings.  You want to modify some specific settings according to the hardware. ...

  • Page 77: Information Menu

    NOTE: The BIOS Setup Utility screens shown in this chapter are for your  reference only. The actual items or settings on your computer may differ. The BIOS Setup Utility program may have been updated after the  publication of this manual. The settings you select in your operating system might override similar ...

  • Page 78: Main Menu

    Main Menu The Main menu contains the various system settings. Information Main Advanced Security Boot Exit Item Specific Help System Date: [05/14/2013] System Time: [13:09:31] View or set system time. Legacy USB Support: [Enabled] ↑↓ Help Select Item Change Values Setup Defaults ...

  • Page 79: Advanced Menu

    Advanced Menu The Advanced menu contains the advanced settings. Information Main Advanced Security Boot Exit Item Specific Help CD/DVD Auto Power Control: ZPODD  Wake Up Capability Determine whether System Policy: [Performance] power to the CD/DVD AC Initiation: [Disabled] drive will turn off SATA Mode: [AHCI] when system is...
  • Page 80 Wake Up Capability specifies events for waking up the system from S3 (Sleep) state. Press Enter to access the submenu as shown below. Advanced Wake Up Capability Item Specific Help Any-key Wake Up From S3: [Disabled] Allow any key to wake Disabled USB Wake-Up From S3 [Disabled]...
  • Page 81 AMT Configuration configures Active Management Technology parameters. Press Enter to access the submenu as shown below. Advanced AMT Configuration Item Specific Help Intel AMT [Disabled] Enable/Disable Intel Enabled Intel AMT Setup Prompt [Disabled] (R) Active Management Technology BIOS Extension. Note: iAMT H/W is always enabled.
  • Page 82 Virtualization Technology Setup sets Virtualization Technology parameters. Press Enter to access the submenu as shown below. Advanced Virtualization Technology Setup Item Specific Help Intel(R) Virtualization Technology [Disabled] When enabled, a VMM Disabled Intel(R) VT for Directed I/O (VT-d) [Disabled] can utilize the additional hardware capabilities.
  • Page 83 Graphic Setup sets graphics related options. Press Enter to access the submenu as shown below. Advanced Graphic Setup Item Specific Help DVMT Pre-Allocated: Select Pre-Allocated 128MB Graphics Memory size used by the Internal Graphics Device. This has no effect if external graphics are present.
  • Page 84 Button Setup sets hardware button related options. Press Enter to access the submenu as shown below. Advanced Button Setup Item Specific Help P1 Function: [Disabled] Define P1 button as Blackout Blackout ON/OFF , Quick launch button or Emergency button. Help ↑↓...

  • Page 85: Wireless Lan

    Device Configuration enables or disables several hardware components. Press Enter to access the submenu as shown below. Advanced Device Configuration Item Specific Help Wireless LAN Set WLAN device to Enabled WWAN [Enabled] enable/disable. Bluetooth [Enabled] Media Card Reader [Enabled] Smart Card Reader [Enabled] HD Audio [Enabled]...

  • Page 86: Security Menu

    Security Menu The Security menu contains the security settings, which safeguard your system against unauthorized use. Information Main Advanced Security Boot Exit Item Specific Help Supervisor Password Is: Cleared User Password Is: Cleared Set or clear the Set Supervisor Password: [Enter] Enter Supervisor account’s...
  • Page 87 typing it again and pressing Enter. You can set the supervisor/user password to be required for starting up the system and/or entering BIOS Setup. Password on Boot allows you to enable or disable the entering of password for booting up your system. Once the password is successfully set and this item is enabled, it is required for booting up the system.

  • Page 88: Boot Menu

    Boot Menu The Boot menu sets the sequence of the devices to be searched for the operating system. Information Main Advanced Security Boot Exit Item Specific Help Boot priority order: 1: SATA ODD: MATSHITA DVD-RAM UJ8E1 Keys used to view or 2: SATA HDD1: WDC WD5000LPVX-22V0TT0 ...

  • Page 89: Exit Menu

    Exit Menu The Exit menu displays ways of exiting BIOS Setup Utility. After finishing with your settings, you must save and exit so that the changes can take effect. Information Main Advanced Security Boot Exit Item Specific Help Exit Saving Changes Exit Discarding Changes Equal to F10, save Load Setup Defaults...

  • Page 90: Quick Bios Settings

    Quick BIOS Settings During POST, you can quickly access specific BIOS settings using the hot keys as described below. Keys Functions Opens the Boot menu where you can specify the device to boot from. Enables LAN boot. Ctrl + P Opens Intel®...

  • Page 91: Using Getac Software

    Chapter 6 Using Getac Software Getac software includes application programs for specific computer components and utility programs for overall management. This chapter describes how to use the programs. Using Getac Software...

  • Page 92: G-Manager

    Monitoring  GPS Status  Right-click the Getac Utility icon ( ) located on Windows taskbar and select G-Manager. The G-Manager window appears, containing 7 tabs as described later. NOTE: Depending on your model, the actual items appearing on the screen may differ from those shown in this manual.

  • Page 93: System Tab

    The System tab provides system information. To view specific information, select the component from the list on the left side of the screen. The information of the selected component will be displayed on the right side of the screen. Using Getac Software...

  • Page 94: Battery Tab

    If the AC adapter is connected, some information is not shown.  When the percentage % Left is less than 10% then the value will be  displayed in red. When an abnormal battery condition is detected, the battery  information values will be displayed in red. Using Getac Software...
  • Page 95 To perform a gauge reset: 1. Connect the AC adapter. 2. Click Start, located next to the health bar 3. In the pop-up dialog box, click Yes to start the process. The window as below appears displaying the progress bar. Using Getac Software...

  • Page 96: Eco Tab

    ECO Tab The ECO tab allows you to configure ECO modes (or called power profiles). To put the system into an ECO mode, use the ECO button. (See “Using the Quick Buttons” in Chapter 2 for information.) Using Getac Software...

  • Page 97: Eco Information

    Windows. (See Windows Help for the description to each of the power scheme.) After changing the settings, click Apply or OK to save the changes. To restore the settings to the default values, click Default. Using Getac Software...

  • Page 98: Light Sensor Tab

    The Light Sensor tab allows you to enable automatic keyboard backlight. To have the keypad backlight automatically turn on in poor lighting environment, click the checkbox Automatic Keyboard Backlit. Click Apply or OK to save the changes. Using Getac Software...

  • Page 99: Antenna Tab

    Antenna Tab The Antenna tab allows you to set if your system will automatically use the external GPS or WWAN antenna when connected. Select the checkbox(es) accordingly. Click Apply or OK to save the changes. Using Getac Software...

  • Page 100: Monitoring Tab

    The right portion of the screen allows you to set how the monitored items are displayed and how often the monitoring is updated. Always On Top – allows the monitoring window to remain on top of  your display. 6-10 Using Getac Software...
  • Page 101 To stop monitoring, click the Close button at the upper right corner of the monitoring window or click Stop Monitor on the Monitoring tab page of G-Manager. 6-11 Using Getac Software...

  • Page 102: Gps Status Tab

     Signal strength of the satellites in the Signal Indicator section  When GPS positioning is completed, the Data Summary section shows the GPS information of the current location. To stop GPS positioning, click Stop GPS. 6-12 Using Getac Software...

  • Page 103: P1 Quick Button Definition Utility

    P1 Function item under the Advanced menu. (See “Advanced Menu” in Chapter 5.) Save and exit the program. 2. Right-click the Getac utility icon ( ) on the Windows taskbar and select Quick Buttons Definition. 3. The following window appears. To assign a program to a button, click the Open button 4.
  • Page 104 5. A matching program icon will appear in the settings window. NOTE: You can restore the quick buttons to the default settings by clicking Get Default. 6-14 Using Getac Software...

  • Page 105: Caring For The Computer

    Chapter 7 Caring for the Computer Taking good care of your computer will ensure a trouble-free operation and reduce the risk of damage to your computer. This chapter gives you guidelines covering areas such as protecting, storing, cleaning, and traveling. Caring for the Computer...

  • Page 106: Protecting The Computer

    Protecting the Computer To safeguard the integrity of your computer data as well as the computer itself, you can protect the computer in several ways as described in this section. Using an Anti-Virus Strategy You can install a virus-detecting program to monitor potential viruses that could damage your files.

  • Page 107: Taking Care Of The Computer

    Taking Care of the Computer Location Guidelines For optimal performance, use the computer where the recommended  temperature is between 0 °C (32 °F) and 55 °C (131 °F) – actual operating temperature depending on product specifications. Avoid placing the computer in a location subject to high humidity, ...

  • Page 108: General Guidelines

    General Guidelines Do not expose your skin to the computer when operating it in a very hot  or cold environment. Do not place heavy objects on top of the computer when it is closed as  this may damage the display. The screen surface is easily scratched.

  • Page 109: Battery Pack Guidelines

    Battery Pack Guidelines Recharge the battery pack when it is nearly discharged. When recharging,  make sure that the battery pack is fully charged. Doing so may avoid harm to the battery pack. The battery pack is a consumable product and the following conditions ...

  • Page 110: Touchscreen Guidelines

    The computer’s input voltage and surrounding temperature will directly affect the battery pack’s charge and discharge time: – charging time will be prolonged when the computer is turned on. To shorten the charging time, it is recommended that you place the computer in sleep or hibernation mode.
  • Page 111 When there is noticeable discrepancy in the operation of the touchscreen  function (wrong location on intended operation or improper display resolution), refer to the Windows online Help for instructions on recalibrating the touchscreen display. Caring for the Computer...

  • Page 112: When Traveling

    When Traveling Before traveling with your computer, make a backup of your hard disk  data into flash disks or other storage devices. As an added precaution, bring along an extra copy of your important data. Make sure that the battery pack is fully charged. ...

  • Page 113: Chapter 8 Troubleshooting

    Chapter 8 Troubleshooting Computer problems can be caused by hardware, software, or both. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems.

  • Page 114: Preliminary Checklist

    Preliminary Checklist Here are helpful hints to follow before you take further actions when you encounter any problem: Try to isolate which part of the computer is causing the problem.  Make sure that you turn on all peripheral devices before turning on the ...

  • Page 115: Solving Common Problems

    Solving Common Problems Battery Problems The battery does not charge (Battery Charge indicator does not light amber). Make sure that the AC adapter is properly connected.  Make sure that the battery is not too hot or cold. Allow time for the ...

  • Page 116: Display Problems

    Make sure that the distance between the two devices is within the limit  and that there are no walls or other obstructions between the devices. Make sure that the other device is not in “Hidden” mode.  Make sure that both devices are compatible. ...

  • Page 117: Dvd Drive Problems

    Simultaneous display/multi-display does not work. Make sure that you turn on the external monitor before turning on the  computer. Press the Fn+F5 hot key to toggle through the display options or change  the display through Control Panel. DVD Drive Problems The DVD drive cannot read a disc.

  • Page 118: Hardware Device Problems

    The ExpressCard stops communicating properly. The application may have been reset when the computer is turned off or  in Sleep mode. Exit and restart the application. Hardware Device Problems The computer does not recognize a newly installed device. The device may not be correctly configured in the BIOS Setup program. ...

  • Page 119: Keyboard And Touchpad Problems

    Keyboard and Touchpad Problems The keyboard does not respond. Try connecting an external keyboard. If it works, contact an authorized  dealer, as the internal keyboard cable might be loose. Water or liquid is spilt into the keyboard. Immediately turn off the computer and unplug the AC adapter. Then ...

  • Page 120: Power Management Problems

    The PC card stops communicating properly. The application may have been reset when the computer is turned off or  in Sleep mode. Exit and restart the application. Power Management Problems The computer does not enter Sleep or Hibernation mode automatically.

  • Page 121: Software Problems

    Software Problems An application program does not work correctly. Make sure that the software is correctly installed.  If an error message appears on the screen, consult the software  program’s documentation for further information. If you are sure the operation has stop, reset the computer. (See ...

  • Page 122: Startup Problems

    Startup Problems When you turn on the computer, it does not seem to respond. Make sure that either the AC adapter is connected or the battery has  power. For models with the “HDD preheat” feature: When turning on the ...
  • Page 123 Consult your dealer or an experienced radio technician for help.  I cannot connect to another WLAN device. Make sure that the WLAN feature is turned on.  Make sure that the SSID setting is the same for every WLAN device in the ...

  • Page 124: Other Problems

    Other Problems The date/time is incorrect. Correct the date and time via the operating system or BIOS Setup  program. After you have performed everything as described above and still have  the incorrect date and time every time you turn on the computer, the RTC (Real-Time Clock) battery is at the end of its life.

  • Page 125: Resetting The Computer

    Resetting the Computer You may have to reset (reboot) your computer on some occasions when an error occurs and the program you are using hangs up. If you are sure the operation has stopped and you cannot use the “restart” function of the operating system, restart the computer by any one of these methods: Press Ctrl+Alt+Del on your built-in keyboard.

  • Page 126: System Recovery

    System Recovery Use System Recovery when: The Windows operating system does not start at all.  You want to restore the system to the factory state.  WARNING: Using this feature will reinstall Windows to your system and configure it ...
  • Page 127 4. The progress bar shows the percentage completed. When it reaches 100%, the system turns off. 5. Turn on the computer. The Windows setup wizard starts. Follow the onscreen prompts to continue. 6. When the system restarts, the installer screen appears. The installer will perform system hardware detection and driver installation.

  • Page 129: Appendix A Specifications

    Appendix A Specifications NOTE: Specifications are subject to change without any prior notice. Parts Specifications Intel® Core™ i5-4300M vPro™ Processor 2.6GHz, Max. 3.3GHz with Intel® Turbo Boost Technology, 3MB L3 Intel® Smart Cache Intel® Core™ i7-4600M vPro™ Processor2.9GHz, Max 3.6GHz, with Intel®...
  • Page 130 Parts Specifications Card slots SecureDigital card PCMCIA CardBus Type II × 2 or 1 ExpressCard/34 / 54 (option) Smart Card I/O ports USB 3.0, eSATA/ USB 3.0 combo x 2, serial (RS-232)× 2, VGA, HDMI, RJ-45, headphone out, microphone, mini IEEE 1394a , docking (80 pin) Intel®...

  • Page 131: Appendix B Regulatory Information

    Appendix B Regulatory Information This appendix provides regulatory statements and safety notices on your computer. NOTE: Marking labels located on the exterior of your computer indicate the regulations that your model complies with. Please check the marking labels and refer to the corresponding statements in this appendix. Some notices apply to specific models only.

  • Page 132: On The Use Of The System

    On the Use of the System Class B Regulations Federal Communications Commission Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 133: Safety Notices

    Canada Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numérique de Classe B respecte toutes les exigences du Règlement Canadien sur le matériel brouileur. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
  • Page 134 FINNISH VAROITUS: Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan valmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. ENGLISH CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer.
  • Page 135 paper or other objects that will reduce cooling. Do not use the AC adapter while it is inside a carrying case. Connect the adapter to a proper power source. The voltage  requirements are found on the product case and/or packaging. Do not use the adapter if the cord becomes damaged.

  • Page 136: On The Use Of The Rf Device

    On the Use of the RF Device NOTE: The information in this section applies to models with the wireless module. USA and Canada Safety Requirements and Notices IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
  • Page 137 The use of wireless devices on airplanes is governed by the Federal  Aviation Administration (FAA). The use of wireless devices in hospitals is restricted to the limits set forth  by each hospital. Antenna use: In order to comply with FCC RF exposure limits, low gain integrated ...
  • Page 138 EMC Requirements This device uses, generates and radiates radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allowed by the Federal Communications Commission (FCC). This device complies with the limits for a Class B digital device pursuant to Part 15 subpart C of the FCC Rules and Regulations.

  • Page 139: European Union Ce Marking And Compliance Notices

    Canada Radio Frequency Interference Requirements To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit être utilisé...
  • Page 140 Greek To προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής Οδηγίας 1999/5/EC. Icelandic Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 1999/5/EC. Italian Questo prodotto è conforme alla Direttiva Europea 1999/5/EC. Norwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC.

This manual is also suitable for:

B300-g5

Table of Contents

Save PDF