Bios Setup; When And How To Use - Getac 3X02 User Manual

BIOS Setup

When and How to Use

You need to run BIOS Setup Utility when:
You see an error message on the screen requesting you to run BIOS Setup

Utility.
You want to restore the factory default BIOS settings.

You want to modify some specific settings according to the hardware .

You want to modify some specific settings to optimize the system performance.

To run BIOS Setup Utility, press the F2 key when the prompt appears on the screen
during system startup. The prompt shows up on the screen for only a few seconds.
You must press F2 quickly. The BIOS Setup Utility main screen appears as shown
next.
Information
Serial NO:
Processor Info:
Installed System Memory:
SATA HDD:
SATA ODD:
ESTAT Port:
BIOS Revision:
EC Revision:
LAN MAC Address:
IEEE 1394 GUID:
Operating Time:
F1 Help
Esc Exit
5-2
Using BIOS Setup and System Recovery
Main Advanced
00000000000000
Intel(R) Core(TM) i7 CPU L620@2.00GHz
2048MB
[SAMSUNG HM250HI] 250GB
[Optiarc DVD RW AD-7580S]
[None]
R0.05.070520S
R0.06F
00-22-20-0A-54-AE
00-40-D0-01-00-48-1A-F9
52 Hours
Select Item -/+
↑↓
Select Menu Enter
←→
Security Boot
Change Values
Select Sub-Menu

Exit
F9 Setup Defaults
F10 Save and Exit