Pc Card Problems; Power Management Problems - Getac v100 User Manual

PC Card Problems

The PC card does not work.
Make sure that the PC card controller driver is correctly installed.

Make sure that the PC card is correctly seated.

If the card requires an IRQ (Interrupt ReQuest), make sure that there is

one available.
The PC card stops communicating properly.
The application may have been reset when the computer is turned off or

in Standby mode. Exit and restart the application.

Power Management Problems

The computer does not enter Standby or Hibernation mode automatically.
 If you have a connection to another computer, the computer does not
enter Standby or Hibernation mode if the connection is actively in use.
 Make sure that the Standby or Hibernation time-out is enabled.
The computer does not enter Standby or Hibernation mode immediately.
 If the computer is performing an operation, it normally waits for the
operation to finish.
The computer does not resume from Standby or Hibernation mode.
The computer automatically enters Standby or Hibernation mode when

the battery pack is empty. Do any one of the following:
 Connect the AC adapter to the computer.
 Replace the empty battery pack with a fully charged one.
The computer does not enter Hibernation mode with the
 Make sure that the Hibernation function is specified for the sleep
button.
+ hot keys.