Table of Contents
Advertisement
START & STOP TIMES FOR DAILY INHIBITION OF OUTPUT 1
Setting with start and stop times into the keypad, the real-time inhibition period for output 1 will
recycle daily until the time settings are cleared.
This function works with the real-time-clock. Set up the real-time at Location 55 is necessary.
For safety reason, the Egress Button is designed always valid. The door lock (controlled by output 1)
can be opened with it at anytime during inhibition.
LOCATION
START TIME
++ 00
(1)
HOURS
MINUTES
(2)
(1) LOCATION
Key in Location
(2) START TIME
++ 00
– Set the real-time inhibition starting time in Hour and Minute. The allowed time
figure is 00:00 – 23:59
The starting time is based on 24 hours daily with the first two digits for hours and the last two digits
for minutes. The time in second always starts at 0 0.
(3) STOP TIME
++ 00
– Set the real-time inhibition stopping time in Hour and Minute. The allowed time
figure is 00:00 – 23:59
The stopping time is based on 24 hours daily with the first two digits for hours and the last two digits
for minutes. The time in second always starts at 0 0.
(4) VALIDATION
Press
key once.
Two-beep confirms the setting.
(Location 56)
STOP TIME
VALIDATION
++ 00
(4)
HOURS
MINUTES
(3)
33
Advertisement
Table of Contents
