Other Facilities; On-Board Led Indicators; Pacifier Tone & The Led Signals; Jumper For Back-Lit Selection - AEI DK-2822 User Manual

Rfid access control keypad
Table of Contents

Advertisement

OTHER FACILITIES

ON-BOARD LED INDICATORS

RED / GREEN (Right) ---
It lights up in Green for Output 1 activation; and Red for Output 2
activation.
AMBER (Centre) ---------
It flashes in Standby. It shows the system status in synchronization
with the beep tones. The standby flashing can be OFF with
programming. See Location 73 for the details.
RED/GREEN (Left) -------
It lights up in Red while one of the outputs is inhibited. It is flashing
during inhibition paused.
It is the Wiegand LED for feedback indication. It lights up in Green.
PACIFIER TONES & THE LED SIGNALS
The buzzer and the amber LED indicator give following tones and signals respectively for system
status:
STATUS
1) In Programming Mode
2) Successful Key Entry
3) Successful Code / Card Entry
4) Unsuccessful Code / Card Entry
5) Power Up Delay
6) Output Relay Activation **
7) In Standby ***
8) System Refreshing
) 9 Card or Code Already Stored in
System
10) Keypad link-up with Decoder Failed
11) Real -time-clock stopped after
power failure
NOTE:
*
All Pacifier Tones can be ON or OFF through the programming option at Location 71
* *
The Output Relay Activation beep can be selected through the programming option at
Location 72
The Standby flashing can be ON or OFF through the programming option at Location 73
* * *

JUMPER FOR BACK-LIT SELECTION

1) Full Back-lit ---
The keypad gives dim backlit in standby. It
turns to full backlit when a key button is
pressed, then back to dim backlit 10
seconds after the last key button is
pressed.
2) Auto Back-lit ---
The backlit is OFF in standby. It turns to
full backlit when a key button is pressed,
then back to OFF 10 seconds after the last
key button is pressed.
TONES *
AMBER LED
-----
ON
1 Beep
1 Flash
2 Beeps
2 Flashes
5 Beeps
5 Flashes
Continuous Beeps
Continuous Flashes
1 Second Long Beep
-----
-----
1 Flash in 1 Second Interval
-----
Fast Flashes for 2.5 Minutes
1 Long Beep
-----
Continuous 1 Beep/1 sec
-----
Continuous 3 Fast Beeps
-----
/5 secs
FULL
BACK-LIT JUMPER
12
AUTO

Advertisement

Table of Contents
loading

Table of Contents