Table of Contents
Advertisement
MASTER CODE
LOCATION
(1)
(1) LOCATION
Key in Location
(2) MASTER CODE
Master Code is the authorization code for setting the system to programming mode. It is NOT
an User Code operating the output relays.
The Master Code can be 4 to 8 digits.
When a new master code is keyed in and confirmed, the old master code is replaced.
The master code is also the Link-up Code between the keypad and the optional decoder in
Split-decoded operation.
(3) VALIDATION
Press
key once. Two-beep confirms the entry.
Example:
Set a Master Code "2 2 3 3" ----
SUPER USER CODE
The Super User Code has TWO functions. It is prepared to operate the two outputs and make
operation of inhibit enable / disable to those outputs.
LOCATION
SUPER USER CODE
(1)
(1) LOCATION
Key in Location
(2) SUPER USER CODE
The Super User Code can be 4 to 8 digits.
When a new Super User Code is keyed in and confirmed, the old one is replaced.
(3) VALIDATION
Pressing
key to confirm code entry.
Example:
a) Set a Super User Code "2 5 8 0" ----
b) Deleted a Super User Code from memory: Key in the Location number and #. ----
MASTER CODE
VALIDATION
4 to 8 Digits
(2)
(3)
VALIDATION
4 to 8 Digits
(2)
(3)
18
(Location 01)
(Location 02)
Advertisement
Table of Contents
