Panasonic PN28240i-ID Operation Manual page 144

4.7.4.g. Out-Profile Action Configuration Menu
On the Access Control Configuration Menu, pressing "O" opens the
Out-Profile Action Configuration Menu, as shown in Fig. 4-7-16. On this
screen, you can configure out-profile setting.
PN28240i Local Management System
Access Control Configuration -> Out-Profile Action Configuration Menu
Out-Profile Action:
Index Committed Rate
----- ----------------
Note: Committed Rate - 1Mbps/unit, Max available rate 10/100:100, Giga:1000
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
[C]reate Out-Profile Action
Command>
Enter the character in square brackets to select option
Fig. 4-7-16 Out-Profile Action Configuration Menu
Screen Description
Total Entries Shows the number of out-profiles (number of indexes) created.
Index Shows the out-profile index number.
Committed Rate Shows the packet buffer rate.
Burst Size(KB) Shows the traffic burst size that can be transmitted exceeding the
committed rate. For burst size, 4K, 8K, 16K, 32K, and 64K are used.
Deny/Permit Shows whether a packet is denied or permitted.
Policed-DSCP Shows a DSCP value to be marked.
Total Entries :0
Burst Size(KB) Deny/Permit
-------------- -----------
[D]elete Out-Profile Action
[M]odify Out-Profile Action
[Q]uit to previous menu
144
Policed-DSCP
------------