Panasonic PN28240i-ID Operation Manual page 193

4.7.7.m. EAP-Request Configuration Menu
On the 802.1x Access Control Configuration, pressing "E" opens the
EAP-Request Configuration screen, as shown in Fig. 4-7-25-14. On this
screen, you can configure the EAP Request transmission settings used in the
IEEE802.1X MAC-based access control mode.
PN28240i Local Management System
802.1x Access Control Configuration -> EAP-Request Configuration
[E]AP-Request Port Configuration
[U]nauthorized MAC Address Table
[Q]uit to previous menu
Notes: EAP-Request Function is supported for MAC Based Access Control only
Command>
Enter the character in square brackets to select option
Fig. 4-7-25-14 EAP-Request Configuration
193