Panasonic PN28240i-ID Operation Manual page 122

Available commands are listed below.
N Set a name of VLAN.
Press "N." The command prompt changes to "Enter VLAN name>." Enter a VLAN
name within 30 one-byte characters.
P Set a member of VLAN.
Press "P." The command prompt changes to "Enter egress port number>." Enter a port
number you wish to set.
When entering multiple port numbers, delimit with comma with no space, or
hyphenate the continuous numbers.
A Apply modification of VLAN configuration.
Press "A" to apply the setting.
Q Return to the previous menu.
122