Panasonic PN28240i-ID Operation Manual page 163

Screen Description
Total Hosts Displays the total number of hosts registered in the authentication
status table.
The maximum number is 1024.
Authorized Hosts Displays the number of authorized hosts.
Auth Aging Time Displays the authentication aging time in minutes. (Factory default
setting: 1440)
MAC Address Displays the MAC address of the terminal to be authenticated.
Port Displays the port number to which the terminal is connected.
Auth Type Displays the authentication type.
If Auth Status is Authorized, the authentication type when
authentication succeeded is displayed. If Unauthorized, the
authentication type when authentication is on standby is displayed.
802.1X
MAC
WEB
1X/MAC
1X/WEB
1X/MAC/WEB
MAC/WEB
Auth Status Displays the authentication status.
Authorized
Unauthorized
Remaining Aging Displays the remaining time (minutes) before re-authentication.
Time If the remaining time is 0, Auth Status becomes Unauthorized,
executing the authentication process again.
Available commands are listed below.
N Display the next page.
Press "N" to display the next page.
P Display the previous page.
Press "P" to display to the previous page.
D Delete a host from the authentication status table and deauthorize it.
Press "D." The command prompt changes to "MAC Address
(XX:XX:XX:XX:XX:XX)>." Enter the MAC address of a host to be deleted.
A Configure the authentication aging time.
Press "A." The command prompt changes to "Enter auth aging time >." Enter an
integer number between 1 and 65535 (seconds). To disable the aging, enter 0.
S Change the display order of the authentication status table.
Press "S." The command prompt changes to "Select the order type (M/P)>." Press
"M" to display in the order of MAC address or "P" to display in the order of port
number.
Q Return to the parent menu.
The authentication type is 802.1X access control.
The authentication type is MAC authentication.
The authentication type is WEB authentication.
The authentication type is 802.1X access control
or MAC authentication.
The authentication type is 802.1X access control
or WEB authentication.
The authentication type is 802.1X access control,
MAC authentication, or WEB authentication.
The authentication type is MAC authentication or
WEB authentication.
Authentication is authorized.
Authentication is not authorized.
Communication in this state is limited in the guest
VLAN.
163