Panasonic PN28240i-ID Operation Manual page 186

Press "E." The command prompt changes to "Enter re-authentication period>."
Enter an integer number between 1 and 65535 (seconds).
A Enable/disable re-authentication.
Press "A." The command prompt changes to "Select Per port or MAC address (P/M)
>." Press "P" to set per port. Press "M" to set per MAC address.
Press "P." The command prompt changes to "Enable or Disable
re-authentication ?(E/D) >." Press "E" to enable re-authentication. Press "D" to
disable it.
Press "M." The command prompt changes to "Enter supplicant MAC address >."
Enter the MAC address to be configured. Then, the command prompt changes to
"Enable or Disable re-authentication ?(E/D) >." Press "E" to enable
re-authentication. Press "D" to disable it.
K Set the reference for the re-authentication time interval.
Press "K." The command prompt changes to "Select re-authentication timer,
RADIUS or Local? (R/L)>." Press "R" to use the re-authentication time reported from
the RADIUS. Press "L" to use Re-auth Period of this switch.
Z Initialize the authentication status.
Press "Z." The command prompt changes to "Would you initialize
authenticator?(Y/N) >." To initialize the authentication status, press "Y." Otherwise,
press "N."
R Initialize the re-authentication status.
Press "R." The command prompt changes to "Initialize re-authentication?(Y/N) >."
To initialize the re-authentication status, press "Y." Otherwise, press "N."
H Delete an authorized MAC address and deauthorize it.
Press "H." The command prompt changes to "Enter supplicant MAC address >."
Enter the MAC address to be deauthorized.
I Set the re-authentication interval of the force authorized MAC address.
Press "I." The command prompt changes to "Enter Force auth MAC period >." Enter
an integer number between 1 and 65535 (seconds). To disable re-authentication,
enter 0.
Q Return to the parent menu.
186