Panasonic PN28240i-ID Operation Manual page 159

Available commands are listed below.
D Enable/disable the storm control for unknown unicast traffic.
Press "D." The command prompt changes to "Enter port number>." Enter a port
number to designate. Then, the command prompt changes to "Enable or Disable
DLF storm control status>." Press "E" to enable the unknown unicast control. Press
"D" to disable it.
B Enable/disable the storm control for broadcast traffic.
Press "B." The command prompt changes to "Enter port number>." Enter a port
number to designate. Then, the command prompt changes to "Enable or Disable
broadcast storm control status (E/D)>." Press "E" to enable the broadcast control.
Press "D" to disable it.
M Enable/disable the storm control for multicast traffic.
Press "M." The command prompt changes to "Enter port number>." Enter a port
number to designate. Then, the command prompt changes to "Enable or Disable
multicast storm control status (E/D)>." Press "E" to enable the multicast control.
Press "D" to disable it.
T Set the threshold number of packets (Packet Per Second).
Press "T." The command prompt changes to "Enter port number>." Enter a port
number to designate. Then, the command prompt changes to "Enter threshold
value>." Enter the threshold number of packets (packet per second) between 0 and
262143.
Q Return to the previous menu.
159