Table of Contents
Advertisement
Connect the USB cable at one end to the converter and at the other to the computer where the
software is installed.
Power on the electronic converter.
Execute the program WinsmeterMX4 following the sequence Start – Programs – Tecfluid S.A. -
WinsmeterMX4.
12.2
Port connection
In the "Port" section, choose the appropriate port for the converter. This will appear with the
name of the port followed by MX4 and its serial number. Then click "Open".
Once the port is open, the button "Open" in the "Installation" and "Programming" sections
activates.
45
Advertisement
Table of Contents
