Table of Contents
Advertisement
5
MAIN MENU
To access the main menu of the converter, press the key (Enter). The following screen
appears:
The "Installation" option
Chapter 6 of this manual.
The "Programming" option allows to program all parameters of the converter, as explained in
Chapter 7 of this manual.
From the "Reset totalizer" option, the user can return the totalizer to zero. When exiting the
menu, the totalizer will begin to accumulate again.
Note: The "Reset totalizer" operation requires the program password input (see point 5.1).
The options "Software Version" and "Serial Number" are informative and are discussed in
Chapters 8 and 9 of this manual.
5.1
Passwords to access the menus
The password for the installation menu may be different from the password for the program
menu.
By default, the equipment is factory configured with the password disabled.
If you want to change any of these passwords, you must enter the corresponding menu and
once inside, access the submenu "Password".
To change the access password of
the
installation
"Installation" on the main menu and
then "Password".
allows the basic configuration of the instrument, as
menu,
select
27
Number of menu items
Selected item
To change the access password of
the
programming
"Programming" in the main menu and
then "Password".
explained in
menu,
select
Advertisement
Table of Contents
