Table of Contents
Advertisement
Chapter 5
Table 5-23:
PicamParameter
Enumerator
PicamParameter_EMIccdGainControlMode
PicamParameter_EnableAuxOutput
PicamParameter_EnableIntensifier
PicamParameter_EnableModulation
PicamParameter_EnableModulationOutput
Signal
PicamParameter_EnableNondestructive
Readout
PicamParameter_EnableSensorWindow
Heater
PicamParameter_EnableSyncMaster
PicamParameter_ExactReadoutCount
Maximum
PicamParameter_ExposureTime
PicamParameter_ExternalShutterStatus
PicamParameter_ExternalShutterType
PicamParameter_FocalLength
PicamParameter_FrameRateCalculation
PicamParameter_FrameSize
PicamParameter_FramesPerReadout
PicamParameter_FrameStride
Configuration APIs
Enumerator Definitions (Sheet 3 of 11)
Determines how the intensifier gain and electron
multiplication gain are controlled in emICCD hardware via the
PicamEMIccdGainControlMode
Refer to
page 75, for additional information.
Enables the AUX output pulse.
Enables the intensifier.
NOTE: The intensifier must be enabled and powered on for
Enables RF modulation for intensified hardware.
Enables an RF output signal from intensified hardware to be
used as the user sees fit.
Allows the hardware to periodically readout while exposing.
Enables the sensor window to heat up in an effort to prevent
condensation.
Enables SyncMASTER1 and SyncMASTER2 gate pulses.
Reports the maximum number of readouts the hardware can
acquire.
NOTE: This does not include non-destructive readouts from
Controls the time the sensor is exposed in milliseconds (mS).
Reports the status of the shutter that is external to the
hardware via the
Refer to
additional information.
Reports the type of shutter that is external to, and can be
driven by, the hardware via the
enumeration.
Refer to
additional information.
Reports the optical path length from the focusing mirror to
the sensor in millimeters (mm).
Reports the estimated frame rate in frames-per-second.
NOTE: If there is more than one frame-per-readout, this
NOTE: If the hardware is being externally triggered, this
Reports the size, in bytes, of a data frame.
Reports the number of frames contained in one readout.
Reports the length, in bytes, necessary to traverse to the next
frame.
Description
Section 5.1.1.8,
PicamEMIccdGainControlMode, on
it to function.
hardware that supports the feature.
PicamShutterStatus
Section 5.1.1.31,
PicamShutterStatus, on page 97 for
PicamShutterType
Section 5.1.1.33,
PicamShutterType, on page 99 for
represents the burst frame rate within the readout.
represents the fastest possible rate.
85
data enumeration.
data enumeration.
data
Advertisement
Table of Contents
