Teledyne Princeton Instruments PICam 5.x Programmer's Manual page 164

164
5.4.3.5 Picam_GetParameterValueType()
Description
Picam_GetParameterValueType()
specified parameter.
Syntax
The syntax for
Input Parameters
Input parameters for
camera_or_accessory: Handle for the hardware under test.
Output Parameters
Output parameters for
Advanced API Usage
When used in conjunction with Advanced APIs, if
handle, it may be a handle to either the:
•
•
Related Structures
For additional information, refer to the following parameter structure:
•
•
PICam™ 5.x Programmer's Manual
Picam_GetParameterValueType()
PICAM_API Picam_GetParameterValueType(
Picam_GetParameterValueType()
parameter: Specifies the parameter for which the data type of the stored
Picam_GetParameterValueType()
type: Pointer to the memory location in which the data type of the
, or
device
.
model
PicamParameter;
PicamValueType.
returns the data type for a value stored within a
PicamHandle camera_or_accessory,
PicamParameter parameter,
PicamValueType* type);
value is being requested.
specified parameter's value is stored.
camera_or_accessory
is:
are:
are:
is a camera
Issue 11