Teledyne Princeton Instruments PICam 5.x Programmer's Manual page 141

Chapter 5
5.4.1.22 Picam_SetParameterPulseValueOnline()
Description
Picam_SetParameterPulseValueOnline()
parameter during data acquisition.
Syntax
The syntax for
Input Parameters
Input parameters for
Output Parameters
There are no output parameters associated with
Picam_SetParameterPulseValueOnline().
Advanced API Usage
When used in conjunction with Advanced APIs,
•
•
Picam_SetParameterPulseValueOnline()
camera device.
Configuration APIs
NOTE:
The specified parameter must be capable of being
configured during data acquisition.
Refer to
Picam_CanSetParameterOnline()
information.
Picam_SetParameterPulseValueOnline()
PICAM_API Picam_SetParameterPulseValueOnline(
Picam_SetParameterPulseValueOnline()
camera: Handle for the camera being configured.
parameter: Specifies the Pulse parameter that is to be configured during data
acquisition.
Valid parameters are those of type PicamValueType_Pulse.
value: Pointer to the memory location in which the desired configuration
value is stored.
, or
device
.
model
configures the specified Pulse
for additional
PicamHandle camera,
PicamParameter parameter,
const PicamPulse* value);
may be a handle to either the:
camera
effectively sets
141
is:
are:
on the
parameter