Teledyne Princeton Instruments PICam 5.x Programmer's Manual page 156

156
5.4.2.15 Picam_GetStatusParameterPurview()
Description
Picam_GetStatusParameterPurview()
Syntax
The syntax for
Input Parameters
Input parameters for
camera_or_accessory: Handle for the hardware for which the status purview is being
Output Parameters
Output parameters for
Advanced API Usage
When used in conjunction with Advanced APIs, if
handle, it may be a handle to either the:
•
•
Related APIs
For additional information, refer to the following related APIs:
•
•
PICam™ 5.x Programmer's Manual
Picam_GetStatusParameterPurview()
PICAM_API Picam_GetStatusParameterPurview(
const PicamStatusPurview** purview);
Picam_GetStatusParameterPurview()
requested.
parameter: Specifies the parameter whose status purview is being requested.
NOTE: The specified parameter must be a waitable status.
Picam_GetStatusParameterPurview()
purview: Pointer to the allocated status purview.
NOTE: This memory is allocated by PICam and must be
, or
device
.
model
Picam_CanWaitForStatusParameter()
Picam_DestroyStatusPurviews()
returns the scope of a waitable status.
is:
PicamHandle camera_or_accessory,
PicamParameter parameter,
Refer to
Picam_CanWaitForStatusParameter()
additional information.
released by calling
Picam_DestroyStatusPurviews().
camera_or_accessory
Issue 11
are:
for
are:
is a camera