Teledyne Princeton Instruments PICam 5.x Programmer's Manual page 82

82
5.1.1.22 PicamOutputSignal
Data Type
PicamOutputSignal
Description
PicamOutputSignal
OUTPUT signal.
Enumerator Definitions
Refer to
Table 5-22:
PicamOutputSignal_Acquiring
PicamOutputSignal_AlwaysHigh
PicamOutputSignal_AlwaysLow
PicamOutputSignal_AuxOutput
PicamOutputSignal_Busy
PicamOutputSignal_EffectivelyExposing
PicamOutputSignal_EffectivelyExposing
PicamOutputSignal_Exposing
PicamOutputSignal_Gate
PicamOutputSignal_InternalTriggerT0
PicamOutputSignal_NotReadingOut
PicamOutputSignal_ReadingOut
PicamOutputSignal_ShiftingUnderMask
PicamOutputSignal_ShutterOpen
PicamOutputSignal_WaitingForTrigger
PICam™ 5.x Programmer's Manual
is defined as
is the set of parameters defining the hardware's MONITOR
Table 5-22 for enumerator definitions.
PicamOutputSignal
Enumerator
Alternation
.
enum
Enumerator Definitions
The signal is high when the hardware is
acquiring or ready to receive the first
trigger.
The signal is always high.
The signal is always low.
The signal is high during an AUX output
pulse.
The signal is high when the hardware is
busy.
The signal is high for the entire duration
the sensor is exposed.
The signal is high for the entire duration
the sensor is exposed; every other frame
beginning with the first.
The signal is high when the sensor is
exposed as requested.
The signal is high during a gate pulse.
The signal is high during t
trigger.
The signal is low when the sensor is
reading out.
The signal is high when the sensor is
reading out.
The signal is high when the image is
shifting under the sensor's mask.
The signal is high when the shutter is
open.
The signal is high when the hardware is
waiting for a trigger.
Issue 11
Description
of the internal
0