Teledyne Princeton Instruments PICam 5.x Programmer's Manual page 140

140
5.4.1.21 Picam_SetParameterFloatingPointValueOnline()
Description
Picam_SetParameterFloatingPointValueOnline()
parameter with a floating point value during data acquisition.
Syntax
The syntax for
PICAM_API Picam_SetParameterFloatingPointValueOnline(
Input Parameters
Input parameters for
Advanced API Usage
When used in conjunction with Advanced APIs,
•
•
Picam_SetParameterFloatingPointValueOnline()
the camera device.
Output Parameters
There are no output parameters associated with
Picam_SetParameterFloatingPointValueOnline()
Related APIs
For additional information, refer to the following related APIs:
•
PICam™ 5.x Programmer's Manual
NOTE:
The specified parameter must be capable of being
configured during data acquisition.
Refer to
Picam_CanSetParameterOnline()
information.
Picam_SetParameterFloatingPointValueOnline()
Picam_SetParameterFloatingPointValueOnline()
camera: Handle for the camera being configured.
parameter: Specifies the parameter that is to be configured during data acquisition.
Valid parameters are those of type PicamValueType_FloatingPoint.
value: The floating point value with which the specified parameter is to be
configured.
, or
device
.
model
Picam_CommitParameters().
configures the specified
for additional
PicamHandle camera,
PicamParameter parameter,
piflt value);
may be a handle to either the:
camera
effectively sets
Issue 11
is:
are:
on
parameter