Teledyne Princeton Instruments PI-MTE System Manual page 43

Chapter 5
Detector Temperature (Setup
Interface tab page (Setup
Cleans and Skips tab page (Setup
Experiment Setup Main tab page (Acquisition
Experiment Setup ROI tab page (Acquisition
Experiment Setup Timing tab page (Acquisition
Operation
+20°C for the First Light procedure. To see when the array temperature reaches
and stabilizes at the target temperature, leave the Detector Temperature dialog
box open. When the target temperature is reached, the dialog box will report
that the Current Temperature has Locked.
NOTE:
When using the USB 2.0 interface, the Detector
Temperature dialog box will not display temperature
information while you are acquiring data.
High Speed PCI (or PCI (Timer))
NOTE:
This tab page is not available if you are using the USB 2.0
interface.
Default
• Exposure Time: 100 ms
• Accumulations & Number of Images: 1
Use this function to define the region of interest (ROI).
• Imaging Mode: Selected
Selecting Full loads the full size of the chip into the edit boxes.
• Timing Mode: Free Run
• Shutter Control: Normal
• Safe Mode vs. Fast Mode: Safe
►
Detector Temperature...)
►
Hardware)
►
Hardware)
►
►
Experiment Setup...)
Experiment Setup...)
►
Experiment Setup...)
43