Drain Pan Switch - Henny Penny LOV LVG-102 Technical Manual

7-16. DRAIN PAN SWITCH

Feb. 2011
This switch closes when the drain pan is pushed properly in
place under the fryer. If the drain pan is not properly in place,
or the drain switch is faulty, display prompts such as,
PAN" or "CHANGE FILTER PAD" shows in the display.
Removal:
1. Drain pan switch is located on the rear of fryer. Using a
3/8" socket or nut driver, remove the nuts securing the
drain switch bracket to the fryer.
2. Using a 1/8" Allen wrench, remove shoulder bolt securing
the cover and remove cover.
3. Using a Phillips-Head screwdriver, remove screws
securing switch to bracket and remove switch from
bracket.
4. Label and remove wires from switch
Checkout:
5. Check for continuity across the normally open and the
common terminals of drain switch. Circuit should show
open and when plunger is pressed, show closed. Replace
switch if faulty, placing wires on new switch on normally
open and common terminals.
Normally
Closed
Normally
Open
7-20
Model LVG-102, 103, 104
"CHECK
Common