Level 2 Programming; Advanced Product Settings - Henny Penny LOV LVG-102 Technical Manual

4-1. ADVANCED PRODUCT
SETTINGS
Dec. 2007
SECTION 4. LEVEL 2 PROGRAMMING
Used to access the following:
• Advanced changes to product settings
• Error code log
• Password programming
• Alert Tone/Volume
• No. of cook cycles before filter is suggested
• Automatic filter time
1. Press and hold
shows in the display, followed by ENTER CODE.
2. Enter code 1, 2, 3, 4 (first 4 product buttons). "PROD"
and "COMP" show in the displays.
3. Press right √ button and 'SELECT PRODUCT' and "-P 1-"
show in the displays.
4. Use the
or press the desired product button.
5. Press right √ button and product (ex: NUGGETS) shows in
the left display and "MODIFY" "YES NO" shows in the
right display. Press the √ button to change this product, or
press the X button to choose another product.
>Load Compensation, Load Compensation
Reference, Full Heat, PC Factor<
6. If √ button was pressed, "LD COMP" shows in the display
along with the load compensation value. This automatical-
ly adjusts the time to account for the size and temperature
of the cooking load. Press the product buttons
7. Press
along with the load compensation average temperature.
(if load compensation is set to "OFF", then "_ _ _" shows
in display and setting cannot be programmed) This is the
average cooking temperature for each product. The timer
speeds up at temperatures above this setting and slows
down at temperatures below this setting. Press the product
buttons
4-1
and buttons until LEVEL - 2
and buttons to scroll through 40 products,
to change this value of 0 to 20.
button until "LCMP REF" shows in the display
Model LVG-102, 103, 104
to change this value.