Checking Structure And Alignment - Festo YXCF Operating Instructions Manual

Assembly
6.9

Checking structure and alignment

Requirements:
– All modules and components of the product are mounted. Exception: motors with brake
– All setting and alignment work has been completed.
Fig. 55: Product structure, example
1. Move the Y-module by hand over the entire stroke length of the X-axis.
Ä The module should be easily and evenly movable.
If it is difficult to move at particular positions or over the entire length, this may be caused by
offset or tension: align the product again.
2. For motor with brake: mount motor.
Festo — YXCF — 2021-07b 81