Table of Contents
Advertisement
Chapter 6
Troubleshoot the System
Load the System Defaults
84
If the computer fails after you change the set-up menus, load the system default
settings to correct the error. These default settings have been selected to
optimize computer performance.
Follow these steps to load the system defaults.
IMPORTANT
An external keyboard and mouse must be connected to the computer to
perform these steps.
1. Restart the computer as specified in
2. During POST, press F2 on an attached keyboard to access the UEFI set-
up utility.
3. Click Firmware Configuration on the set-up screen.
4. Click Default (A) on the Main screen.
5. Click Save (B) to save your changes.
6. Click Exit (C) to close the UEFI set-up utility.
Rockwell Automation Publication 6177R-UM002F-EN-P - May 2018
Restart the Computer on page
A
B
31.
C
Advertisement
Table of Contents
