Table of Contents
Advertisement
Chapter 3
Operate the Computer
Start the Computer
30
Follow these steps to start the computer.
IMPORTANT
The following steps apply to when you must manually start the computer.
See
Connect Power on page 27
for the first time.
1. Make sure any connected components with separate power supplies
(such as an external display) are turned on first.
2. Make sure all necessary peripheral devices are connected to the
corresponding I/O ports on the computer.
3. If you have a1450R computer and the
front door is locked, complete the
following steps:
a. Unlock the front door with the
provided key.
b. Open the door to access the power
switch.
4. Plug the AC power cable into the power
input on the computer and into a power source or wall outlet.
SHOCK HAZARD: Connect the AC power cord to a power source with
an earth ground. Failure to follow this warning can result in electrical
shock.
5. Press the power switch.
See
Hardware Features
The computer performs certain actions when it is started or reset. See
the Computer on page
If your computer does not start or you notice other anomalies, refer to the
Troubleshooting on page 82.
Rockwell Automation Publication 6177R-UM002F-EN-P - May 2018
for when power is applied to the computer
on
page 11
for the power switch location.
31.
Restart
Advertisement
Table of Contents
