Table of Contents
Advertisement
Chapter 5
Configure the UEFI (BIOS) Settings
64
Table 2 - Serial Port 1 Configuration
Parameter
Serial Port 1
Device Settings
Change Settings
Table 3 - Serial Port 2 Configuration
Parameter
Serial Port 2
Device Settings
Change Settings
Table 4 - Parallel Port Configuration
Parameter
Parallel Port
Device Settings
Change Settings
Device Mode
Rockwell Automation Publication 6177R-UM002F-EN-P - May 2018
Description
Enables or disables the serial (COM1) port.
Options: Enabled (default) or Disabled
Displays the Base I/O address and IRQ setting of serial port 1.
Select an optimal setting for the super I/O device.
Options: Auto (default), I/O=3F8h; IRQ=4, I/O=2F8h; IRQ=4, I/O=3E8h;
IRQ=4,
I/O=2E8h; IRQ=4
Description
Enables or disables the serial (COM2) port.
Options: Enabled (default) or Disabled
Displays the Base I/O address and IRQ setting of serial port 2.
Select an optimal setting for the super I/O device.
Options: Auto (default), I/O=2F8h; IRQ=3, I/O=3F8h; IRQ=3, I/O=3E8h;
IRQ=3,
I/O=2E8h; IRQ=3
Description
Enable or disables the parallel (LPT/LPTE) port.
Options: Enabled (default) or Disabled
Displays the Base I/O address and IRQ setting of the parallel port.
Select an optimal setting for the super I/O device.
Options: Auto (default), I/O=378h; IRQ=5, I/O=278h; IRQ=5, I/O=3BCh;
IRQ=5
Select a printer mode.
Options: Standard Parallel Port Mode (default), EPP Mode, ECP Mode, EPP
Mode, and ECP Mode
Advertisement
Table of Contents
