Table of Contents
Advertisement
3. Remove the HDD assembly from its bay.
a. Loosen the two captive thumbscrews of the HDD assembly (A).
b. Pull the HDD assembly from its bay (B).
750R Computer
A
B
4. Remove the HDD module from its tray.
a. Remove the four mounting screws from the bottom of the tray (C).
b. Detach the tray from the HDD module to be replaced (D).
D
C
C
C
5. Install the new HDD module to the tray.
ATTENTION: Mechanical shock can damage a drive. Do not drop or bump the
drive.
a. Install the new HDD module with the PCB-side down.
b. Fasten the drive tray over the HDD module (E).
c. Secure the drive tray to the module with the four mounting screws
(F).
Torque the screws to 0.59 N•m (5.2 lb•in).
Rockwell Automation Publication 6177R-UM002F-EN-P - May 2018
A
Existing
HDD Module
Drive Tray
Mounting Screws (4)
C
Replace Components
Chapter 4
1450R Computer
A
B
A
E
New
HDD Module
F
F
F
F
39
Advertisement
Table of Contents
