Table of Contents
Advertisement
Chapter 5
Configure the UEFI (BIOS) Settings
68
Boot
(1)
Parameter
Bootup NumLock State
Quiet Boot
Boot Priority List
(2)
USB Boot Priorities
(3)
CD-DVD ROM Boot Priorities
Hard-Drive Boot Priorities
(1) See
page 52
for an explanation of common buttons near the bottom of screen.
(2) This data field is visible only when a USB device is connected to the computer during startup.
(3) This data field is visible only on computers with CD-DVD ROM devices.
Rockwell Automation Publication 6177R-UM002F-EN-P - May 2018
Description
Enables or disables the Num Lock key on boot.
Option: On (default), Off
Enables or disables Quiet Boot option.
Option: Enabled or Disabled (default)
IMPORTANT: When enabled, this option hides the POST screen messages at
computer startup.
Change the boot order. By default, these devices are the boot priority:
1. USB key
2. CD-ROM
3. HDD
4. PXE
5. UEFI Shell
6. PCI/PCIe RAID/SCSI/SAS card
Follow instructions in the dialog box to change the boot order, and to enable or
disable options.
Change the USB boot order through a dialog box.
Follow instructions to change the boot order, and to enable or disable options.
Change the CD-DVD ROM boot order through a dialog box.
Follow instructions to change the boot order, and to enable or disable options.
Change the hard drive boot order through a dialog box.
Follow instructions to change the boot order, and to enable or disable options.
Advertisement
Table of Contents
