Table of Contents
Advertisement
5. Remove the screw that secures the slot cover of the selected PCI slot (A).
6. Pull out the slot cover (B) and store it.
IMPORTANT
7. Remove the add-in card from its protective packaging.
8. Slide the add-in card into the selected PCI slot (C).
Press to verify that it is firmly seated.
9. Secure the add-in card bracket to the chassis with its screw (D).
Install an add-in card on the 750R computer.
10. Connect any necessary cables to the card.
11. Reinstall the chassis cross member or I/O card retention bracket as
detailed in
Install I/O Card Retention Bracket on page
IMPORTANT
12. See any installation instructions that came with the add-in card to verify
that all installation steps are followed.
13. Follow the steps for
Rockwell Automation Publication 6177R-UM002F-EN-P - May 2018
Do not discard the slot cover. If the add-in card is removed in the
future, the slot cover must be reinstalled to maintain proper cooling.
A
B
C
D
Install an add-in card on the 1450R computer.
The chassis cross member or I/O card retention bracket must be
installed for vibration and shock purposes.
Post-configuration on page
Install Accessories
Appendix A
B
A
D
C
90.
35.
93
Advertisement
Table of Contents
