Table of Contents
Advertisement
4. Install the I/O card retention bracket.
IMPORTANT
a. 750R computers: Slide the I/O card retention bracket to the left to
secure the seating slots (D).
b. Align the I/O card retention bracket with the mounting holes (E).
c. 750R computers: Secure the I/O card retention bracket to the chassis
with the two screws from the factory-installed chassis cross member
(F).
1450R computers: Secure the I/O card retention bracket to the chassis
with the four screws from the factory-installed chassis cross member
(F).
d. Torque the screws to 0.6 N•m (5.2 lb•in).
E
D
750R Computer
5. Reinstall the computer cover as detailed in
page
37.
6. Follow the steps for
Rockwell Automation Publication 6177R-UM002F-EN-P - May 2018
Verify that each sleeve of the I/O card retention bracket is properly
aligned with its add-in card before you perform step 4a for 750R
computers and step 4c for 1450R computers.
F
F
F
Post-configuration on page
Install Accessories
Appendix A
F
E
1450R Computer
Reinstall the Cover on
35.
91
Advertisement
Table of Contents
