Table of Contents
Advertisement
5. Install the new HDD module to the tray.
ATTENTION: Mechanical shock can damage an HDD module. Do not
drop or bump the HDD module.
a. Install the new HDD module with the PCB-side down.
b. Fasten the tray over the HDD module (E).
c. Secure the tray to the HDD module with the four mounting screws
(F).
Torque the screws to 0.59 N•m (5.2 lb•in).
6. Return the HDD assembly into its bay (G).
7. Tighten the two captive thumbscrews of the HDD assembly to secure it
to the computer (H).
750R Computer
H
G
8. Follow the steps for
Rockwell Automation Publication 6177R-UM002F-EN-P - May 2018
H
Post-configuration on page
Install Accessories
Appendix A
1450R Computer
H
G
H
35.
89
Advertisement
Table of Contents
