Led Indicators; Eki-6558Ti - Advantech EKI-6558TI User Manual

Chapter 2
In this chapter, you will be given an overview of the IP-67 MANAGED INDUSTRIAL
ETHERNET SWITCH hardware installation procedures.

2.1 LED Indicators

There are few LEDs located on the front panel display the power status and network
status of IP-67 MANAGED INDUSTRIAL ETHERNET SWITCH. Each of them has its
own specific meaning shown as below.
2.1.1

EKI-6558TI

Table 2.1: EKI-6558TI LED Definition
LED Color
PWR1 Green
PWR2 Green
P-Fail
(depends on the
Red
Fault Relay
Alarm
configuration)
R-Master Green
P1 ~ P8 Green
EKI-6558TI_EKI-6559TMI_Manual_ed2
Installation
Description
On Power input 1 is active
Off Power input 1 is inactive
On Power input 2 is active
Off Power input 2 is inactive
On Power or Ethernet port failure occurs
Off No failure occurs
On The industrial switch is the master of the X-ring group
Off The industrial switch is not the master of the X-ring group
On Connected to network
Flashing Networking is active
Off Not connected to network
10