Using The Intercom Mode; Adjusting The Listening Volume Level - Mitel A5370 User Manual

Using the intercom mode

The intercom mode is used to communicate with internal parties, without any action on
your part.
To activate the interphone mode, the user only needs to press the loudspeaker key while
the phone is in standby mode. The
cate that the mode is active.
Terminal in standby mode; pressing the loudspeaker key terminates this mode. The sym-
bol shown in the first line disappears.
Note: This mode can also be activated in the Parameters menu of the terminal
(Voir "Activating the interphone mode", page 70).
The interphone mode on a multi-key or multi-line phone is only active for the first call.
An internal contact calls you:
To call an internal party:
Ending the communication in intercom mode:

Adjusting the listening volume level

*
Depending on the programming performed by the system operator.
*
symbol appears now in the first line in order to indi-
After a short ring, the communication is set up automatically
without any intervention.
Dial directly the number and talk as soon as the contact has
picked up.
If the party you have called has the initiative for hanging up, you
do not have to do anything; the phone returns to standby.
If you want to hang up, press the
Independently of the mode (handset, hands-free, headset or
group listening), the sound volume can be adjusted (8 levels).
The setting is stored.
Volume down:
• Press the - key.
Volume up:
• Press the + key.
Making a call
key.
11