Call Features; Using Handsfree Mode; Using Ring Intercom Always; Using Mute - Mitel MiVoice Office 250 User Manual

Call Features

The following sections describe call-related features.

Using Handsfree Mode

You can use Handsfree Mode to activate the speakerphone.
NOTES
To use Handsfree Mode:

Using Ring Intercom Always

If another extension has Handsfree Mode enabled for incoming internal calls (see the previous
section), you can use Ring Intercom Always to override Handsfree Mode on the extension,
requiring the called party to pick up the handset to answer your call.
To override Handsfree Mode for the current call:
1. Before you enter the extension number, press #. RING EXTENSION NUMBER appears.
2. Dial the extension number.
To use Ring Intercom Always to always send non-handsfree calls:

Using Mute

You can use Mute to temporarily turn off your microphone, preventing the other party on the call
from hearing you.
To mute or unmute the microphone:
Mitel ® 8528 Telephone User Guide – Release 6.2, June 2016
The Ring Intercom Always feature prevents calls from being answered in
Handsfree Mode (see the following section).
You cannot use Handsfree Mode if you are using a headset, or if you have more
than one telephone assigned to an extension number.
The telephone uses half-duplex audio when using the speakerphone (both parties
cannot talk at the same time).
With the handset on-hook, dial 319. HANDSFREE MODE ON appears. Dial 319 again to
turn Handsfree Mode off.
With the handset on-hook, dial 377. RING IC ALWAYS ON appears. Dial 377 again to
turn Ring Intercom Always off.
While on a call, press
microphone is muted, the Mute button lamp is lit. Press Mute again to unmute the
microphone.
Mute on. MICROPHONE MUTE ON appears. When the
Call Features
Page 31