Sata Power Connector (Scn1、Scn2); Sata Connector (Sata1、Sata2); Atx Power On/Off Button(Sw1) - AXIOMTEK IPC962-511-FL Series User Manual

1.7.7 SATA Power connector (SCN1、SCN2)
Use SCN1、SCN2 for interfacing to SATA 2.5" HDD power supply.
Pins Signals
1 +12V level
2 GND
3 GND
4 +5V level
1.7.8 SATA Connector (SATA1、SATA2)
These Serial Advanced Technology Attachment (Serial ATA or SATA) connectors are for high-
speed SATA interfaces. They are computer bus interfaces for connecting to devices such as
hard disk drives. This board has two SATA 3.0 ports with 6Gb/s performance.
Pins Signals
1 GND
2 SATA_TX+
3 SATA_TX-
4 GND
5 SATA_RX-
6 SATA_RX+
7 GND
1.7.9

ATX Power On/OFF Button(SW1)

The ATX power button is on the I/O side. It can allow users to control SBC87853
power on/off.
Function Description
On Turn on/off system
Off Keep system status
Introduction
IPC962/IPC964 Series User's Manual
17